|
ProAc Loudspeakers
Tablette Reference 8
From the moment of its launch in 1979 the ProAc Tablette has been acclaimed as one of the greatest mini-monitors of all time. Many thousands of pairs have been sold over the last twenty-three years and this stunning little loudspeaker has become a firm favourite with music lovers worldwide.
The original Tablette cabinet was just 101/2"(266mm) high and 6"(152mm) wide and 9" (228mm) deep. However the limitations of drive unit technology in those days meant that this pioneering design was not able to offer the scale of soundstage, extended bass and increased power handling common in larger designs. Over succeeding years therefore, through seven more incarnations, the size of the Tablette cabinet was increased to meet this demand, culminating in the current Tablette 2000 model.
But that was then. Now, with the advent of far more technically refined and powerful drive units, the eighth version of the Tablette is reborn in its original cabinet configuration but with a scale of sound to rival much larger high quality loudspeakers.
These two new drive units represent the cutting edge of audio technology. The all-new 41/2" bass/midrange driver is a marvel, producing tremendous bass power and a clean, open midrange. With a special round magnesium chassis housing a long-throw cone, raised suspension and an extremely linear motor system, the driver generates highly controlled and extended bass frequencies. Loading is by small twin reflex ports which reduce unwanted colouration.
A high quality crossover network is coupled directly to the terminals to eradicate any deterioration in the signal paths. This redesigned board incorporates a larger bass inductor than the original Tablette and gives higher output with lower distortion. The crossover knits the midrange seamlessly to the output of the completely new tweeter, a sophisticated 1" soft dome unit with a large surround which produces an exceptionally flat response, outstanding smoothness and fine detail.
The cabinet itself is made from a high quality Birch ply which is critically damped and tuned with bitumen. As ever with ProAc loudspeakers, the Reference Eights are finished with exquisite real wood veneer.
The Tablette Reference Eight is a true monitor level design. The remarkably flat frequency response is characterised by a smooth, natural and detailed output delivered with a surprising level of weight and scale. This diminutive powerhouse can be placed on shelves or ledges, but for true high-end listening is best mounted on heavy rigid stands.
Nominal Impedance 8 ohms
Recommended Amplifiers 10 to 100 watts
Frequency Response 40hz to 30Khz
Sensitivity 86db linear for 1 watt at 1 metre
Bass/Midrange 4 1/2" long throw cone design with linear low distortion motor system and raised suspension in
die cast chassis.
Tweeter 1" soft silk dome exclusive to ProAc with special surround and inner chamber
Crossover Finest components on dedicated circuit board. Multistrand oxygen-free cable throughout.
Split for optional bi-wiring and bi-amping.
Dimensions 10 1/2" (266mm) high 6" (152mm) wide 9" (228mm) deep
Mode Stand/Shelf mounting Grille Acoustically transparent crimplene
Available in the following real wood veneers: Black Ash, Maple, Cherry, Mahogany and Yew (extra cost).
Due to our policy of continuous improvement specifications are subject to change without notice.
Click here to see more.....
|
ProAc Response 1 SC by Peter Familari Herald Sun Australia
WHEN it comes to a reference near field Monitor nothing beats the ProAc Response 1 SC. Sure, my long term favourites were my 15 Ohm Rogers LS35/A until ProAc upped the ante and released the Response 1 SC a couple of years ago.
Since then I've had several pairs in my reviewing room and loved my time with each one.
|
Here's a compact near field monitor with a balanced sound from top to bottom and one that's compatible with a huge range of tube and SS amps.
Unlike my LS35/As, the ProAc is more dynamic and has greater levels of transparency. Side-by-side, the ProAc digs deeper in the bass, has a more forgiving treble and a greater capacity to handle music'sdynamic contrasts.
In short, the ProAc Response 1SC is the speaker LS35/A owners crave without knowing it.
Want to be convinced? Try the ProAcs with the PrimaLuna Prologue valve amplifier rated at 35 watts per channel. Let me know what you think.
Peter Familari
Sound and Vision editor
Herald Sun Australia
|
|
Tablette Reference 8 Signature.
The Tablette Reference Eight, launched in 2001, has proved a hugely successful restatement of the original Tablette design of 1979. Reborn in its earliest cabinet configuration but housing far more technically refined and powerful drive units, it produces a scale and quality of sound unimaginable over two decades ago. Now however, this enduring design scales new heights with the Reference Eight Signature.
At the heart of this major leap forward is a remarkable new bass/midrange driver. Four times as expensive as the standard unit used in the Reference Eight, this new driver incorporates a neodymium bar magnet, copper rings and a copper phase plug. These components add up to vastly improved performance, with even greater linearity and lower distortion. The bass is more excitingly dynamic and the midrange considerably more open. Loading is by small twin reflex ports which reduce unwanted colouration.
A high quality crossover network is coupled directly to the terminals to eradicate any deterioration in the signal paths. This redesigned board incorporates a larger bass inductor than the original Tablette and gives higher output with lower distortion. The crossover knits the midrange seamlessly to the output of the completely new tweeter, a sophisticated 1" soft dome unit with a large surround which produces an exceptionally flat response, outstanding smoothness and fine detail.
The cabinet itself is made from costly marine birch ply which is critically damped and tuned with high grade acoustic material. As ever with ProAc loudspeakers, the Reference Eight Signatures are completed by exquisite real wood veneer, but in keeping with their exclusivity are only available in the most exotic finishes.
The Tablette Reference Eight Signature is a definitive monitor level design. The remarkably flat frequency response is characterised by a smooth, natural and detailed output delivered with a surprising level of power, weight and scale. This diminutive powerhouse can be placed on shelves or ledges, but for true highend listening is best mounted on heavy rigid stands.
Technical Info
Nominal Impedance 8 ohms
Recommended Amplifiers 10 to 100 watts
Frequency Response 38hz to 30Khz
Sensitivity 86db linear for 1 watt at 1 metre
Bass/Midrange 4 1/2" long throw cone design with linear low distortion motor system, neodymium bar magnet,
copper rings and phase plug. ProAc diecast chassis.
Tweeter - 1" soft silk dome exclusive to ProAc with special surround and inner chamber
Crossover - Finest components on dedicated circuit board. Multistrand oxygen-free cable throughout.
Split for optional bi-wiring and bi-amping.
Dimensions 10 1/2" (266mm) high 6" (152mm) wide 9" (228mm) deep
Mode Stand/Shelf mounting
Grille - Acoustically transparent crimplene
Due to our policy of continuous improvement specifications are subject to change without notice.
|
ProAc Response 1 SC
A radical refinement of the internationally acclaimed Response One S, the new Response One SC takes miniature loudspeaker performance into a new dimension.
This latest model incorporates a sensational new bass/midrange unit, manufactured exclusively for ProAc. This driver features an innovative copper magnet and phase plug assembly which has produced startling sonic improvements, particularly in the midrange. Equally important is the introduction of a highly damped, completely transparent cone which marries extreme rigidity to exceptional lightness. The effect of this unique combination is a dramatic lowering of distortion together with a flattening and extension of the frequency response.
Housed in a highly damped cabinet, this dynamic bass/midrange driver, working in tandem with an equalised reflex port, produces exceptional bass extension with greatly enhanced soundstaging and detail. A modified high quality crossover network integrates the bass/midrange output smoothly with that of the dome tweeter, providing seamless reproduction throughout the entire frequency range. But perhaps the most important advance has been in the midrange area. The incorporation of this new bass/midrange drive unit has resulted in a smooth and expansive midrange, completely free of any colouration. Indeed, independent listeners have commented that this is midrange performance of electrostatic quality.
No expense has been spared in the design and construction of the Response One SC. The result is an outstandingly fast, powerful and accurate delivery combined with midrange quality seldom experienced from a box loudspeaker. Finished in a range of exquisite real wood veneers, the Response One SC represents a milestone in compact loudspeaker performance at the highest level.
The full potential of these thoroughbred designs will only be realised through the use of the highest quality partnering equipment.
Technical Info
Nominal Impedance - 8 ohms
Recommended Amplifiers - 20 to 100 watts
Frequency Response - 38hz to 30Khz
Sensitivity - 86db linear for 1 watt at 1 metre
Bass/Midrange - New five inch unit with special transparent cone. Copper magnet assembly and phase plug mounted on die-cast chassis. High temperature voice coil.
Tweeter - ProAc three quarter inch dome unit, with honeycomb - wound voice coil.
Special damping and ferrofluid-cooled coil assembly.
Crossover - Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions - 12" (305mm) high 7" (178mm) wide 9 1/4" (235mm) deep
Weight - 18lbs (8kg)/cabinet
Mode - Stand mounted
Grille - Acoustically transparent crimplene
Finish - Available in the following real wood veneers: Black Ash, Maple, Cherry, Mahogany, Yew, Ebony, Bird's Eye Maple
Due to our policy of continuous improvement specifications are subject to change without notice.
|
ProAc Response D 15
With its roots in the highly acclaimed Response One Point Five, this elegant new model delivers a heightened level of dynamic performance, adding greater weight and a lively muscularity to the musical experience.
At the hub of this improvement is our own new 61/2" bass/midrange unit. This driver has a radical new basket design for higher rigidity and a completely reworked magnet and coil assembly. Bass loading is achieved through a system which has never been used before in a Response range model. Four large conical feet support each cabinet, allowing the flared equalised ports to couple the bass output efficiently to the floor through the plinths. As a result this driver excels in areas of control, power handling, openness and midrange detail.
Through a sophisticated crossover network the bass/midrange driver is harnessed to the famous ProAc 3/4" soft dome tweeter, which has become renowned for its smooth, sweet and detailed sound.
As ever Response range build quality is outstanding. A high density MDF cabinet with walls of varying thickness is heavily damped with bitumen and lined with anechoic grade foam. Finished in real wood veneers, these superb cabinets are built to look good for a long time.
The new D15 is a remarkable fulfilment of the promise of cutting edge technology, producing a powerful yet refined presentation of music out of all proportion to the size of the cabinets. These are floorstanders with a beguiling musicality which will satisfy the most demanding of audiophiles.
Technical Info
Nominal Impedance - 8 ohms
Recommended Amplifiers - 20 to 180 watts
Frequency Response - 30hz to 30Khz
Sensitivity - 88db linear for 1 watt at 1 metre
Bass/Midrange Driver - 6 1/2" diameter unit with new rigid chassis, linear motor assembly and large copper magnet and phase plug. Glass fibre weave cone exclusive to ProAc.
Tweeter - 3/4" soft dome exclusive to ProAc with special honeycomb wound voice coil and rear chamber damping.
Crossover - Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions 38 3/4" (984mm) high on plinths with conical feet, 7 1/2" (190mm) wide, 10" (254mm) deep
Weight - 50lbs (23kg/cabinet)
Mode - Floorstanding
Grille - Acoustically transparent crimplene
Finish Available in the following real wood veneers: - Black Ash, Cherry, Mahogany, Ebony, Bird's Eye Maple, Maple and Yew.
Due to our policy of continuous improvement specifications are subject to change without notice.
|
ProAc Response D 25
To improve on the highly acclaimed Response 2.5 would have been a daunting task but for the development of a new generation of highly efficient and sensitive drive units. The faultless reproduction throughout the frequency range which made the 2.5 such a world-beater has not only been sustained but greatly intensified in the new D25. Good quality valve or Class A transistor amplifiers with an output as low as 10 watts will produce fine results from these exciting new loudspeakers.
The original cabinet dimensions have been retained, but there the similarity ends. The cabinets themselves, handcrafted and finished in real wood veneers, are extremely rigid and heavily damped as before, but the introduction of a large flared port beneath the plinths gives better interaction with the listening room, making cabinet placement less critical.
An entirely new 6 " bass/midrange driver, built by one of the UK's leading studio monitor manufacturers, is used in tandem with a radical new one inch soft dome tweeter. This combination is harmonised through a sophisticated HQC crossover network and ProAc oxygen-free wiring, delivering exceptional power handling, efficiency and sensitivity.
The D25 is like a breath of fresh air, with an immediacy and dynamism which reaches out to touch the listener. The improved sensitivity squeezes every detail out of any type of recording and the classic ProAc virtues of low colouration, fine balance and sweet smoothness ensure an unforgettable listening experience at a very reasonable price level.
Technical Info for D25
Nominal Impedance - 8 ohms
Recommended Amplifiers - 10 to 200 watts
Frequency Response - 20hz to 30Khz
Sensitivity - 88db linear for 1 watt at 1 metre
Bass/Midrange - Driver 6 1/2" (165mm) ProAc unit with coated polypropylene cone on die-cast chassis.
Tweeter - ProAc 1"(25mm) soft dome with special surround and inner damping
Crossover - HQC crossover using dedicated components wired throughout with multistrand oxygen-free cable. Split for optional bi-wiring and bi-amping.
Dimensions - 42" (1066mm) high on plinths with conical feet, 8 3/4" (222mm) wide, 10" (254mm) deep
Weight - 57 lbs (26kg) /cabinet
Mode - Floorstanding
Grille - Acoustically transparent crimplene
Finish - Available in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Yew, Ebony, Bird's Eye Maple
Due to our policy of continuous improvement specifications are subject to change without notice.
|
ProAc Response D 38
Cabinet size is the only feature the Response D38 has in common with its predecessor, the highly regarded Response 3.8. Internally, everything has been changed to produce a dynamic new level of performance with vastly increased efficiency and sensitivity whilst retaining all the virtues of the earlier model. Good quality valve or Class A transistor amplifiers with an output as low as 10 watts will produce fine results from these exciting new loudspeakers.
The cabinets themselves, handcrafted and finished in real wood veneers, are extremely rigid and well damped to minimise colouration. Reconfigured internally with a new porting system similar to that used on the flagship D100 model, loading for the bass drivers is now provided through a large port which pressurises the air between the cabinet and the plinth, releasing the air through side vents. This method of coupling makes room placement less critical.
A new generation of extremely sensitive drive units has been introduced. Two new 6 1/2" polypropylene coated bass/midrange units, built by one of the UK's leading studio monitor manufacturers, sit either side of a radical new one inch soft dome tweeter. This tweeter, with an improved surround and frontplate and new internal damping combines seamlessly with the other drive units through a sophisticated HQC crossover network and ProAc oxygen-free wiring.
The resulting sound is one of tremendously dynamic speed and power, coupled with a finesse and smoothness which guarantees fatigue-free listening for extended periods. The enhanced sensitivity of the new drive units unearths the tiniest detail from any type of recording to provide a sublime and involving musical experience.
Technical Info for D38
Nominal Impedance - 4 ohms
Recommended Amplifiers - 10 to 250 watts
Frequency Response - 20hz to 30Khz
Sensitivity - 90db linear for 1 watt at 1 metre
Bass/Midrange - (2)Driver 6 1/2" (165mm) ProAc unit with coated polypropylene cone on die-cast chassis
Tweeter - ProAc 1" (25mm) soft dome with special surround and inner damping
Crossover - HQC crossover using dedicated components and wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring and bi-amping.
Dimensions - 49" (1244mm) high on plinths with conical feet, 9 1/4 " (235mm) wide, 13 1/2 " (343mm) deep
Weight - 88 lbs (40kg) /cabinet
Mode - Floorstanding
Grille - Acoustically transparent crimplene
Finish - Available in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Yew, Ebony, Bird's Eye Maple and other finishes to special order
Due to our policy of continuous improvement specifications are subject to change without notice.
|
Audiophile system : ProAc D38
Technical Info for D38
Nominal Impedance 4 ohms
Recommended Amplifiers 10 to 250 watts
Frequency Response 20hz to 30Khz
Sensitivity 90db linear for 1 watt at 1 metre
Bass/Midrange (2)
Driver 6 1/2" (165mm) ProAc unit with coated polypropylene cone on die-cast chassis
Tweeter ProAc 1" (25mm) soft dome with special surround and inner damping
Crossover HQC crossover using dedicated components and wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring and bi-amping.
Dimensions 49" (1244mm) high on plinths with conical feet, 9 1/4 " (235mm) wide 13 1/2 " (343mm) deep
Weight 88 lbs (40kg) /cabinet
Mode Floorstanding
click here for more information and photos....
|
ProAc Response D 80 3 way design.
Spearheading the ProAc range for the last ten years, the imposing Response Fours have carved out their own exclusive audio territory at the very top end of two-channel and extreme home cinema performance.
Now ProAc introduce the Response D80 - a smaller and more affordable loudspeaker than the Four which nonetheless embodies a similar design philosophy and technical excellence. At the same time, the D80's bring their own individual characteristics to bear, exhibiting a remarkable sensitivity and breathtaking dynamism. Driving these loudspeakers, low output valve and Class A transistor amplifiers will now be able to achieve their full potential.
Like the Fours, these new models feature twin bass drivers, twin midrange units and a soft dome tweeter. Critical drive unit placement on the baffle and an intricate and sophisticated crossover network harmonise these elements to produce a sound of immense vitality and authority. As ever with ProAc, build quality is unrivalled. The beautiful hand-crafted cabinets, finished in natural real wood veneers, are heavily damped to provide a solid platform for the sound.
The two studio quality eight inch bass drivers are mounted both top and bottom of the enclosure and are ported through both the bottom and sides of the cabinet to produce a clean bass response of great power and depth. Between the bass drivers are a pair of new two-inch midrange domes which excel in producing faster and more detailed midrange response with, in our view, much less colouration than conventional cones.
Centrally mounted, the new ProAc one inch soft dome tweeter is a revelation. Unusually, it incorporates a special roll surround and like the midrange units, a heavy duty, non-resonant front plate, to generate a remarkably sweet and highly extended treble response.
The true forte of the new D80's will always be pure two-channel applications, but their enhanced dynamics and sensitivity also make them ideal for the very best home cinema systems. Whatever the source material - vinyl, CD, digital tape or DVD, these exciting new loudspeakers will produce a highly detailed and satisfying listening experience that will delight for many years.
Technical Info
Nominal Impedance - 4 ohms
Recommended Amplifiers - 10 to 500 watts
Frequency Response - 20hz to 30Khz
Sensitivity - 91db linear for 1 watt at 1 metre
Bass Driver - (2)8" professional drivers with specially doped polypropylene cone.
Midrange Driver - (2)2" soft dome midrange with dedicated rear chamber and heavy duty non-resonant front plate.
Tweeter - 1" soft dome with unique inner chamber and front plate.
Crossover - Finest components on dedicated circuit board. Multistrand oxygen-free copper cable throughout. Split for optional bi-wiring and bi-amping.
Dimensions - 54 1/2" (1384mm) high on plinths with spikes
10" (254mm) wide, 15" (381mm) deep, Weight 121lbs (55kg) cabinet
Mode - Floorstanding
Grille - Acoustically transparent crimplene
Finish - Available in the following real wood veneers: Black Ash, Maple, Mahogany, Cherry, Yew, Ebony, Bird's Eye Maple and Burr Oak.
Due to our policy of continuous improvement specifications are subject to change without notice.
|
ProAc Response D 100 3 way design.
The imposing new Response D100 takes on the mantle of flagship model from our legendary Response Four, which has delighted discerning audiophiles for the last twelve years.
Only the development of an entirely new generation of sensitive drive units has allowed the Fours to be eclipsed - these new drivers produce a much more dynamic sound with greater efficiency, giving high sound levels without the need for high output amplifiers. Good quality valve or Class A transistor amplifiers with an output as low as 10 watts will produce fine results.
Tall, slim, deep and elegant, these beautiful handcrafted cabinets, finished in real wood veneers, are exceptionally rigid. Cabinet colouration is kept to a minimum by covering inner surfaces with sound-deadening material, acoustic wadding and the use of resistive shelving. An entirely new porting system means that room placement of the cabinets is much less critical and the 100's will perform superbly in rooms of most layouts and sizes.
The innovative drive unit layout has ensured greater dispersion and a seamlessly integrated sound. Two new professional quality 10" bass drivers are mounted on the baffle either side of two exciting new 3" midrange units and a one-inch soft dome tweeter. Married by a complex HQC crossover network and connected by ProAc oxygen-free copper wiring, this formidable combination of drive units produces one of the most coherent and expansive sounds in modern hi-fi.
The D100's produce stunning music, effortlessly. The enhanced sensitivity extracts the tiniest detail from any recording without brightness or exaggeration. Greater bandwidth creates a huge soundstage, drawing in the listener and creating a concert hall experience, where the loudspeakers seem to melt from the scene.
Technical Info for D100
Nominal Impedance - 4 ohms
Recommended Amplifiers - 10 to 750 watts
Frequency Response - 20hz to 30Khz
Sensitivity - 92db linear for 1 watt at 1 metre
Bass Driver -(2)Professional quality long-throw 10 (254mm) unit with large magnet assembly and 3 (75mm) ribbon wound voice coil.
Midrange Driver (2)- Studio quality 3 (75mm) soft dome unit with double suspension.
Tweeter - ProAc 1 (25mm) soft dome with special surround and front plate
Crossover - HQC crossover using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring and bi-amping.
Dimensions - 65 (1650mm) high on plinths with conical feet 12 (305mm) wide
19 (482mm) deep
Weight - 289 lbs (131kg) /cabinet
Mode - Floorstanding
Grille Acoustically transparent crimplene
Finish Available in the following real wood veneers: Black Ash, Maple, Mahogany,
Cherry, Yew, Ebony, Bird's Eye Maple and Burr Oak. Other finishes to special order
Due to our policy of continuous improvement specifications are subject to change without notice.
|
|
|
|
